1. Start With Cat Paw or Upload Your Icon
Try the pre-loaded Cat Paw 3D relief right away or drop your pet silhouette, team logo, or monogram PNG/SVG.
Pre-tuned 52 mm × 3.8 mm pocket keychain profile with an integrated watertight mounting hole—upload any icon or print our Cat Paw starter in 20 minutes.
Try the pre-loaded Cat Paw 3D relief right away or drop your pet silhouette, team logo, or monogram PNG/SVG.
MeshForge automatically punches a smooth manifold keyring hole near the top rim without breaking solid walls.
Export Binary .STL, slice at 0.16 mm, and swap filament right above 1.8 mm base thickness for an instant gift or Etsy bestseller.
| Model Type | Nozzle | Layer Height | Walls / Perimeters | Infill | Critical Slicer Tip |
|---|---|---|---|---|---|
| Emboss Keychain / Badge Relief | 0.4 mm | 0.16 mm | 3 walls | 20% Gyroid | Enable Ironing on top surfaces for CNC-smooth plaques |
| Backlit Photo Lithophane (Flat) | 0.4 mm | 0.12 mm | 6 walls | 100% Rectilinear | Stand upright along Y-axis with 6mm brim for max photo detail |
| 2-Layer WiFi / URL QR Code Sign | 0.4 mm | 0.20 mm | 2 walls | 15% Grid | Insert M600 / Filament Change at Base + 0.20 mm (White base, Matte Black QR) |
| Ultra-Fine Logo Medallion | 0.2 mm | 0.08 mm | 4 walls | 25% Gyroid | Switch Wall Generator to Arachne for sharp tiny lettering |
| MSLA Resin Relief / Stamp | LCD 50µm | 0.05 mm | Solid | 100% | Tilt 30° with medium supports on back face to prevent suction cupping |
Thin keychains snap around the keyring hole within weeks if printed below 1.6 mm base thickness or with too few wall loops. Our preset defaults to a rigid 1.8 mm baseplate + 2.0 mm relief (3.8 mm total), balancing crisp pocket ergonomics with strong shear resistance around the mounting hole.
Print with 3–4 perimeter walls in PETG or tough PLA+ so concentric filament loops completely wrap the keyring hole—making it nearly indestructible on daily car keys.
At 52 mm width, the punched hole spans ~5.0 mm diameter—comfortably fitting standard 20–25 mm split rings, lobster clasps, and jump rings.
A 52 mm keychain uses ~6 grams of filament ($0.14 material cost) and prints in roughly 16–22 minutes, or under 10 minutes per unit when batching 12 on one build plate.
Yes! Simply uncheck Add Top Keychain Hole in the dock and raise width to 90 mm for instant custom drink coasters or fridge magnets.