1. Choose Enclosure Style & Dimensions
Pick Closed 6-Panel Box, Open-Top Storage Tray, or Slotted Divider Organizer and enter exact Outer or Inner millimeter dimensions.
Beat MakerCase with true orthogonal kerf compensation, inner/outer dimension switching, 5/6/7-panel layouts, and instant 1:1 mm Glowforge, xTool, and LightBurn exports.
Pick Closed 6-Panel Box, Open-Top Storage Tray, or Slotted Divider Organizer and enter exact Outer or Inner millimeter dimensions.
Apply 1-click presets for 3mm Birch, 3mm Acrylic, 4mm MDF, or 6mm Plywood, then fine-tune laser kerf compensation (default 0.15 mm).
Download color-coded cut/engrave SVG (Red #FF0000 cut, Blue #0066FF labels) or universal R12 DXF ready for LightBurn and RDWorks.
| Laser Machine | Material & Thickness | Measured Kerf | Typical Speed / Power | Joint Fit Guidance |
|---|---|---|---|---|
| Glowforge Basic / Pro (40W CO2) | 3mm Baltic Birch Plywood | 0.15 mm | 170 / Full | Tight press-fit; no glue needed on small boxes |
| Glowforge Basic / Pro (40W CO2) | 3mm Cast Acrylic | 0.16 mm | 165 / Full | Use 0.14 mm for slip-fit solvent welding (Weld-On) |
| xTool S1 / D1 Pro (20W Diode) | 3mm Basswood / Birch | 0.12 mm | 8 mm/s · 100% | Fine rectangular diode spot; air assist mandatory |
| xTool P2 (55W CO2) | 4mm MDF / Draftboard | 0.18 mm | 16 mm/s · 90% | Wipe charred edges before dry-fitting finger joints |
| OMTech K40 / 60W CO2 | 6mm Baltic Plywood | 0.20 mm | 9 mm/s · 75% | Use 2-inch focal lens to minimize tapered kerf walls |
A classic failure mode in DIY laser boxes occurs when tabs meet at 3-way box corners or when beam kerf leaves finger joints sloppy. MeshForge partitions the 3D shell mathematically so Front and Back panels own all eight corner cubes while Left, Right, Top, and Bottom panels lock cleanly inside—guaranteeing zero corner interference.
Our orthogonal outward offset widens every male tab by +kerf and narrows every female slot by −kerf simultaneously, preserving exact exterior dimensions while turning loose laser cuts into tight press-fit woodworking joints.
MeshForge runs 100% locally with instant live SVG bed preview, real AutoCAD R12 DXF AND 1:1 mm SVG downloads, built-in cross-divider mortise slots, and exact orthogonal kerf compensation up to 0.40 mm.
Color-coding lets LightBurn, Glowforge, and xTool Creative Space automatically split operations into Cut (red) and Engrave/Ignore (blue) layers upon import.
Select Inner Clearance mode and enter your PCB, battery, or board dimensions plus 2 mm tolerance—MeshForge automatically adds 2× material thickness to compute the exact outer shell.